thermal mass | Flowmeter Indonesia

Oxygen Gas Flow Meter

Diposkan pada Februari 16, 2015 oleh Yugo Nugroho Boyolali

MF5200 series oxygen flow meters are specially designed for oxygen metering system in a hospital. These meters are operated with the standard industrial user interfaces (RS485), and user defined alarm functions for better monitoring or control over the network. The off-the-shelf products (MF5212 and MF5219) are for gas flow measurement of 0 ~ 300 SLPM and 0 ~ 800 SLPM, respectively.

Features and Applications– Detachable display that can be placed away from the flow channel via a specially designed cable
– Standard 4 ~ 20 mA or RS485 for remote data communication
– Hygienic stainless steel body ready for oxygen metering
– Extended rangeability for accurate flow monitoring and control
– Intrinsic safe enclosure

Mechanical Dimensions

Specification

Product Selection

Insertion Gas Flow Sensor

Diposkan pada Februari 16, 2015 oleh Yugo Nugroho Boyolali

MFI series insertion mass flow meters are designed for gas monitoring and control in a large pipe line where installation of an in-line flow meter is either difficult or costly. The insertion minimal interruption to the normal working circumstance. The suggested starting metering DN is 150 mm and above. All of the insertion meters have an accuracy of ±(1.5+0.5FS)% or better depending on the requests. The meters can work at an environment of -20 to 60 °C and pressure up to 1.5 MPa. Applications include but not limited to oxygen, nitrogen, methane, and compressed air flow monitoring for manufacture process control.

Features and Applications– Highly sensitive, measuring as low as 0.01 Nm/sec, and as high as 65 Nm/sec
– Directly sense mass flow using thermal mass flow principle
– Proprietary MEMS sensor design for better reliability
– Standard 8 ~ 24Vdc power supply
– Low pressure loss reducing energy cost
– Industrial standard communication ports for easy networking and remote control

Mechanical Dimension

Specification

Product Selection

Low Pressure Gas meters

Diposkan pada Februari 16, 2015 oleh Yugo Nugroho Boyolali

The MF-series mass flow meters are specially designed for metering utility gas such as natural gas. These meters are powered by battery and ideal for replacement of traditional mechanical meters where the rangeability or turn-down ratio often falls short of actual accumulated flow. In addition, the mass flow meters do not require additional temperature and pressure compensation and are ready for networking or remote data access. The meters can be applied to pipe diameters from 25 to 100 mm and gas flow speed from 0.1 to 1500 Nm3/hr, with a rangeability or turn-down ratio over 100:1.

Features and Applications– Specially designed for city gas metering
– Automatical compensation for temperature and pressure variations
– Integrated MEMS sensors for extended rangeability
– Proprietary low power technology ensures the long lasting battery life
– Small form factors reduce logistical and installation cost
– Large data storage for easy historical data download and analysis
– All electronic meters ready for data access and networking
– User friendly interface for prepaid IC card system with valve control

Mechanical Dimensions