meters

PVC Flow Meter

Diposkan pada Desember 19, 2012Juni 13, 2017 oleh Yugo Nugroho Boyolali

Turbine Flow Meter
PVC Flow Meter
Water Meter

This unique system of 2″ to 8″ turbine flow meters uses just one moving part, a precision helical rotor. Rotation of the rotor is electronically detected and processed. The high-quality jewel bearings and polished zirconia ceramic shafts minimize friction while providing long wear life in non-lubricating fluids. The entire rotor assembly can be easily removed for field service without removing the flow meter from the pipe.

WTP bodies are fabricated from Schedule 80 PVC fittings, WTC bodies from carbon steel tubing, and WTS bodies (available as special order) from stainless steel tubing. The turbine insert on WTC and WTS meters is machined from a stainless steel casting. The WTP turbine insert is machined from a solid piece of PVC (polypro in 2” size). Turbine rotors on all models are Kynar (PVDF).

WT flow meters can be ordered with various output options. The basic model (100) comes with pulse output only. An electronic display (Seametrics FT420) is mounted on the 101 model to display flow rate and total (resettable or non-resettable), and provide a programmable pulse or 4-20 mA output. Other electronics options include a blind 4-20 mA transmitter (AO55) on the 102 model and a battery-powered (FT415) rate/totalizer plus pulse output for applications that lack power (104 model). All of these controls/displays can be mounted on the meter or remotely mounted on a wall or panel up to 2,000 feet away. WT Series flow meters are compatible for use with most other remote-mount Seametrics displays and controls as well.

FEATURES

One moving part
Low friction jewel bearings
Field repairable without removal from the line
Choice of materials for chemical compatibility
Variety of displays and contr

APPLICATIONS

Water treatment
Wastewater treatment
Cooling water monitoring
Industrial fluid control

PVC Turbine Flow Meter

Diposkan pada Mei 31, 2012 oleh Yugo Nugroho Boyolali

Seametrics WTP Flow Meters
PVC Flow Meter
Non Metal Flowmeters
Chemical Flow Meters

WTP

PRODUCT DETAILS

		PVC-body turbine flow meter In-line, individually-calibrated turbine meter maximizes accuracy Turbine rotor is the only moving part, optimizing low-flow performance Solid-state pickup Electronic register can be meter-mounted or remote Available with blind pulse or 4-20 mA output Materials are chemical-resistant Can be ordered with stub ends (standard) or flanges (optional)

GENERAL INFORMATION
This unique system of 2″ to 8″ turbine meters uses just one moving part, a precision helical rotor. Rotation of the rotor is electronically detected and processed. The high-quality jewel bearings and polished zirconia ceramic shafts minimize friction while providing long wear life in non-lubricating fluids. The entire rotor assembly can be easily removed for field service without removing the *meter* from the pipe. WTP FLOW METER bodies are fabricated from Schedule 80 PVC fittings, WTC flowmeter bodies from carbon steel tubing, and WTS flow meters bodies (available as special order) from stainless steel tubing. The turbine insert flowmeters on WTC and WTS flow meters is machined from a stainless steel casting. The WTP turbine insert flow meters is machined from a solid piece of PVC (polypro in 2” size). Turbine rotors on all models are Kynar (PVDF). WT flow meters can be ordered with various output options. The basic model (100) comes with pulse output only. An electronic display (Seametrics FT420) is mounted on the 101 model to display flow rate and total (resettable or non-resettable), and provide a programmable pulse or 4-20 mA output. Other electronics options include a blind 4-20 mA transmitter (AO55) on the 102 model and a battery-powered (FT415) rate/totalizer plus pulse output for applications that lack power (104 model). All of these controls/displays can be mounted on the *flow meter* or remotely mounted on a wall or panel up to 2,000 feet away. WTSeries flow meters are compatible for use with most other remote-mount Seametrics displays and controls as well.

Irrigation Magnetic Flow Meter

Diposkan pada April 17, 2012Juni 13, 2017 oleh Yugo Nugroho Boyolali

The AG2000 is a spool-type electromagnetic flowmeter for use in irrigation applications in 4” to 10” pipe. With no moving parts, these meters have unobstructed flow and are resistant to wear from debris found in ground or surface water. There are no bearings or propeller to wear out. Minimal straight pipe requirements allow AG2000 flow meters to be used in piping configurations where there is little space between the flow meters and an elbow.

In chemigation applications, the flow meter should be installed upstream of the chemical injection point or enough downstream to allow thorough mixing of fluids ahead of the meter (see Tech Bulletin on Seametrics website Downloads page).

The standard electromagnetic flow meter AG2000 is battery powered. Where an external power source is available, the Magmeter AG2000 can be optionally converted to 7-26 Vdc, with the batteries then serving to maintain continuous operation in case of power failure. This configuration will prolong battery life indefinitely.

The Electromagnetic flow meter comes with built-in pulse output (requires optional output cabling) for data logging or telemetry. Several pulse rates are available. An internal data logger is also available for secure flow logging (-127). A Seametrics FT420W indicator can be added if remote rate/total reading is desired, or an AO55W if a 4-20 mA (analog) signal is required.

The Magmeter AG2000 has a seal wire to protect against unauthorized access. The seal can be broken to change units of measure, replace the battery pack, or to field-install a power/output cable. The optional cable can be factory- or field-installed for applications where external power is available and/or pulse output is needed. The accessory weather guard is recommended in outdoor applications.

FEATURES
• Simple as a mechanical meter
• No moving parts
• Minimal straight pipe required
• Battery power standard; External power optional
• Solar compatible
• Built-in rate & total indicator
• Built-in pulse output for data- logging or telemetry
• Tamper-evident seal

APPLICATIONS
• Irrigation
• Chemigation
• Agricultural automation
• Well usage monitoring
• Dairy Lagoons

Ultrasonic flow meters FLOMIC FL103X

Diposkan pada Desember 11, 2011Juni 13, 2017 oleh Yugo Nugroho Boyolali

Ultrasonic flow meters FLOMIC FL103X

Ultrasonic flow meters of the type series FLOMIC FL103X (FL1034 – the compact version, FL1035 – with remote electronic unit) are intended for measurement and storage of the measured data of instantaneous flow rate, total volume passed through the meter sensor, of cold and hot water and other liquids of similar properties in a wide range of industrial applications. Optionally, the meters can be provided with pressure gauges to monitor the fluid pressure in the piping.

The FLOMIC FL103X meters are noted for high measurement accuracy and long-term stability over a wide range of measured values. They have equipped by internal battery and they can be installed anywhere without availability of external power. The meters include no movable parts and, compared to conventional flow meters, their hydraulic losses are significantly lower.

The associated electronic unit provides for processing of the sensor signals and visualisation of the values of instantaneous flow rate, total fluid volume passed through the meter sensor and fluid pressure, as well as for archiving of the measured data in specified time intervals in the internal meter memory unit. The archived data can be retrieved either via an optical interface, RS 232 communication line or GSM module for further processing by, for example, a notebook computer. On-line processing of the measured values is also possible using the pulse or current (4 to 20mA) outputs.

Technical parameters:
usage	measurement of total volume of the liquid passed through, instantaneous flow rate and pressure
the principle of the measurement	transit-time
type	– one beam (1B) – remote and compact version
rated piping size	DN32 to DN300
maximum permitted pressure	1.6 MPa, 4 MPa (classes MAP 16 and MAP 40)
measurement accuracy	according to EN 14154
flow sampling period	1 sec
tempetarure of liquid	up to 150°C
protection class	IP67 / IP68 in remote version
power source	Li battery 3.6V/16Ah, garanted battery lifetime 6 to 8 years

Technical parameters: