Level Transmitter | Flowmeter Indonesia

Ultrasonic Level Sensor Honda HD350

Diposkan pada Agustus 9, 2016Juni 13, 2017 oleh Yugo Nugroho Boyolali

Honda Ultrasonic Level Meter HD Series

HD serie Honda Elecronic Level Sensor are Level Sensor use ultrasound to count distance of level liquid

Features

Compact and light weight level meter which include sensor and display in one unit.
Digital signal processor realized accurate measurement Graphical display
Mask function equipped. : Unnecessary signal can be eliminated from the received signal by manually. Echo signal from existing structure positioned between sensor and target cause interference. Mask function removes these unnecessary echo effectively.
Wide measurement range

HD350-A：0.3 – 10 ｍ
HD350-B：0.15 – 4 ｍ

For screen mode can be selected

Interface

Three interface methods are prepared for remote operation.

RS-485 (MODBUS protocol)
4 – 20 ｍA current output
Contact points (relay output)

Application :

Level control of liquid, powder or grain in a tank
Level measurement of lakes, ponds or rivers

LEVEL SENSOR TDS200

Diposkan pada Agustus 22, 2015Juni 13, 2017 oleh Yugo Nugroho Boyolali

The ultrasonic level meter is the intelligent non-contact liquid level measuring instruments.
Product has automatic power adjustment, gain control, to a false target, and temperature compensation. U.S. imports of chip processing and advanced testing computing technology to improve the measurement accuracy of the instrument, for the interference signal suppression function to ensure that the real measurement results. The products can be widely used for a high degree of measurement of the level of a variety of liquid and solid materials can also be used for distance measurement.

Performance :

Range : 0.5 ~ 30 m
Accuracy : 0.25%,0.5%
Resolution : Range 10m : 10mm
Frequency : ~40KHZ
Launch angle : 6 º~12º
Blind area : 0.20~0.9m
Show : LCD
Supply voltage : 220VAC/24VDC
Output signal : 4~20mA Standard (Or optional RS485.RS232 when ordering)
Maximum load : 750 Ohm
Case Material : PA6.ABS
Degree of protection : IP65. IP67. IP68
Ambient temperature : -20~+55
Mounting thread : M66x3

Float Level Controllers

Diposkan pada Januari 12, 2012Juni 13, 2017 oleh Yugo Nugroho Boyolali

Level Control
Level Transmitter
Level Indicator

Power unit / Control unit

Applications

It is possible to be used in the liquid level of degree of fixation.
The installation is simple and is possible to adjust the on-off switch freely on site.
Its durability is strong and its wiring work is easy.
It is possible to see the ordered situations without using the meter directly on site.
The multiple outputs are possible through special order.

Wiring

Dimension (mm)

Standard Model and Specification

Float Level Indicator

It is a measuring device which receives 4~20mA signal on the level sensor to notify the value of site order.
It orders with excellent linearity
This measuring device is often used in the measuring of gauges for various industries.
For the qualitative improvement of the product, stated items can be modified.

Pressure Level Transmitter

Diposkan pada Januari 2, 2012Juni 13, 2017 oleh Yugo Nugroho Boyolali

Level Transmitter
Pressure Level

Introduction

As the level of the liquid rises, the pressure in bottom part increases. Accordng to the difference of pressure, it is delivered to the gate of the sensor. And the pressure in the air pushes pressure cell. The electric signal generated by the pressure cell is converted to linear current value.

Feature

Easy install and widely applicable.
Able to use in clean water, waste water, ocean water, sewage tank, plant, LPG, or chemical tank.

Specifications

A/S Check Point
If you find any abnormal symptom during operation, please try to check below points.
■ Is the sequence circuit set correctly?
■ Isn’t the lead line cut or short-circuit?
■ Is the float installed correctly regarding the direction or point?
■ Is there output through the lead line when you move the float up and down?
If the trouble still exists, please kindly contact below.

FLOAT TYPE LEVEL TRANSMITTER

Diposkan pada Desember 11, 2011Juni 13, 2017 oleh Yugo Nugroho Boyolali

FLOAT TYPE LEVEL TRANSMITTER
Level Sensor
Float Level Transmitter

FEATURE

For indicating liquid level and alarming to control.
■ Easy to install and is generally used.
■ Able to control motor continuously.
■ Able to control power seperately.
■ Able to use in chemical, industrial waste water, or food tank.
■ Coated sensor with PVC or PTFE is available for chemical tanks.
■ High temperature type or high viscosity type is available by special order.

Applications

It is widely used for ordering, controlling and alarming the liquid level.
The installation is quick and easy and is the most widely used water level measuring device.
By coating the sensor with P.V.C or PTFE, it is possible to use in the chemical tanks used for special purposes.
It is possible to consecutively control the motors as many as wanted
It is a widely used water level measuring device for sewage and waste water.

Dimensions

PRINCIPLE
Providing electric voltage of DC 24V to the sensor, it makes output of 4~20mA current which is converted by resistors in the sensor.
The continuous fluctuation of the current is caused by the up-and-down movement of the float which has permanent magnet in it. Finally, the current output is transmitted to the controller.

SPECIFICATION :