flow controller

Variable Primary Pressure Flow Controller (Not subject to supply pressure variations) MODEL 2204 SERIES

Diposkan pada Oktober 18, 2016Juni 13, 2017 oleh Yugo Nugroho Boyolali

Variable Primary Pressure Flow Controller (Not subject to supply pressure variations)

MODEL 2204 SERIES

Model 2204 Variable Primary Pressure Flow Controller is a control valve that always keeps flows at a constant rate under a given constant level of secondary pressure (outlet pressure) even when the primary pressure (inlet pressure) fluctuates. The built-in precision needle valve accurately
controls flows to the set flow rate, including ultra-minute flows.

Features

1.Stable flow control
A non-rotary needle valve composed of high-precision components ensures smooth control of even ultra-minute flows.
2.Not subject to supply pressure fluctuations
Flows
are protected from being affected by primary pressure (supply pressure)
fluctuations, under a given constant level of secondary pressure
(outlet pressure).
3.Cleanliness ensured
All
the high-precision components are super-cleaned before assembly so that
the product can be safely used even on high-sensitivity instruments for
analysis for which cleanliness is essential.

Applications

1.Physical and chemical appliances
2.Control of the second-stage operation of pumps
3.Various instruments for analysis
4.Environmental instrumentation systems

Standard Applications

Rated flow ranges : Gas: 10 ML/min–10 L/min

Control
accuracy : Within the set flow ±2% when the primary pressure (inlet
pressure) changes by 0.3MPa in a range
between 0.07 MPa and 0.8 MPa.

Number of turns of regulating screw : Approx. 12 turns

Maximum operating pressure : 0.8 Mpa

Maximum operating temperature : 60℃

Materials of parts in contact with fluids : (A) Al, brass, POM, NBR, SUS316
(SS) SUS316, fluorocarbon resin, FKM

Connection end : Rc 1/8 (M8 + Rc 1/8)

Kofloc Variable Secondary Pressure Flow Controller MODEL 2203 SERIES

Diposkan pada Oktober 18, 2016Juni 13, 2017 oleh Yugo Nugroho Boyolali

Variable Secondary Pressure Flow Controller (Not subject to outlet pressure variations)

MODEL 2203 SERIES

A flow controller is a differential pressure regulator designed to control minute gas flows with precision and keep a certain constant flow rate. Model 2203 Variable Secondary Pressure Flow Controller is a control valve that keeps mass flows at a constant rate under a given constant level of supply pressure even when the load pressure on the secondary side (outlet side) fluctuates, and its construction is designed so that the performance of its precision control over flows to the set flow rate is maintained by the incorporated precision needle valve without being affected by such fluctuations.

Features

1.Stable flow control
   A non-rotary needle valve composed of high-precision components ensures smooth control of minute flows.
2.Not subject to load pressure fluctuations

The incorporated precision needle valve protects flows from being
affected by secondary or outlet pressure fluctuations, so the product is
a ‘must-be’ tool in the first stage of any flow control line.
3.Cleanliness ensured

All the components are super-cleaned before assembly so that the
product can be safely used even on instruments for analysis for which
cleanliness is essential.

Applications

1.Gas chromatographs
2.Environmental instrumentation systems
3.Gas mixing systems in various fields

Standard Applications

Rated flow ranges : Gas: 10 ML/min–20 L/min

Control accuracy : Change in reading within 1.0% of change in load pressure
(Inlet-outlet pressure difference must be at least 0.05 MPa.)

Number of turns of regulating screw : Approx. 12 turns

Maximum operating pressure : 0.8 Mpa

Maximum operating temperature : 60℃

Materials of parts in contact with fluids : (A) Al, brass, POM, NBR
(SS) SUS316, fluorocarbon resin, FKM

Connection end : Rc 1/8 (M8 + Rc 1/8)

Kofloc Flow Meter with Flow Controller MODEL 2503F SERIES

Diposkan pada Oktober 18, 2016Juni 13, 2017 oleh Yugo Nugroho Boyolali

Flow Meter with Flow Controller (Not Subject to Load Pressure Change)

MODEL 2503F SERIES

The constant flow valve Model 2203 that permits constant flow and the precision flow meter RK1400 are combined in this flow meter to permit high-precision measurement and control of a wide flow range, from very small flow to medium flow, when the pressure on the load side (outlet side) changes.

Features

1.This flow meter ensures constant flow under constant pressure on its inlet side even if the load pressure loss on the outlet side changes.

2.The measuring section of the flow meter is based on the highprecision float type flow meter RK1400.

3.The precision valve permits smooth and stable control of very small flow.

4.Constant pressure on the inlet side eliminates pressure errors of the float type flow meter, allowing a complete flow control system to be configured.

Standard Spesifications

1. Fluids : Air,N2,O2,H2,He,Ar,CO2 (Calibration with actual gas) For other gases, please consult us regarding conversion conditions or calibration with the actual gas to be used.
* Option: Scales for two types of fluids

2. Flow range (FS) : From 1–10 ML/MIN to 2–20 L/MIN (Refer to the Capacity Table on page 55.)

3. Accuracy : FS ±2% (Measurement point) (under specified constant primary pressure)

4. Control pressure : The pressure difference between inlet and outlet must be 0.05 MPa or more.

5. Proof pressure : 5 L/MIN or less: 0.8 MPa
10 L/MIN or more: 0.5 Mpa

6. Available scale : 10:1
    a). Body block
         SS : SUS316
                Al : Al, Brass
     b).   Tapered tube : Pyrex®, glass
     c).   Packing
               SS : FKM
               Al : NBR
     d).   Float : Pyrex, SUS316, glass
     e). Protective cover : Acrylic resin
     f). Heat resistance : MAX60℃
    g). Connection : Rc 1/4 (Standard), Rc 1/8 (Optional)

Kofloc Flow Meter with Flow Controller MODEL 2504FR SERIES

Diposkan pada Oktober 18, 2016Juni 13, 2017 oleh Yugo Nugroho Boyolali

Flow Meter with Flow Controller (Not Subject to Inlet Pressure Change)
MODEL 2504FR SERIES

The constant flow valve Model 2204 that permits constant flow and the precision flow meter RK1400 are combined in this flow meter to permit high-precision measurement and control of a wide flow range from very small flow to medium flow when the gas supply pressure (inlet side) changes.

Features

1.This flow meter ensures constant flow under the constant pressure on its outlet side even if the pressure on the inlet side changes.

2.The flow controller is made on the basis of the Model 2204 with excellent precision control characteristics, permitting smooth control of very small flow.

3.The measuring section of the flow meter made on the basis of the high-precision float type flow meter RK1400 ensures highly reliable flow.

Standard Spesifications

1. Fluids : Air,N2,O2,H2,He,Ar,CO2 (Calibration with actual gas)
For other gases, please consult us regarding conversion conditions or calibration with the actual gas to be used.
* Option: Scales for two types of fluids

2. Flow range (FS) : From 1–10 ML/MIN to 1–10 L/MIN (Refer to the Capacity Table on page 55.)

3. Accuracy : FS ±2% (Measurement point)
The flow fluctuation is within FS ±2% when the inlet pressure changes to 0.07–0.7 MPa under the flow meter outlet pressure condition.

4. Control pressure : The pressure difference between inlet and outlet must be 0.07 MPa or more.

5. Proof pressure : 5L/MIN or less : 0.7MPa
10 L/MIN or more: 0.5 Mpa

6. Available scale : 10:1

Material : SS

Body block : SUS316

Al, Brass

Tapered tube : Pyrex , glass

Packing : FKM

NBR

Float : Pyrex, SUS316, glass

Protective cover : Acrylic resin

Heat resistance : MAX60℃

Connection : Rc 1/4 (Standard), Rc 1/8 (Optional)

Kofloc Low-Cost Metal Sealed Mass Flow Controller /Meter Model 5400

Diposkan pada Oktober 18, 2016Juni 13, 2017 oleh Yugo Nugroho Boyolali

Kofloc Low-Cost Metal Sealed Mass Flow Controller /Meter
Model 5400

The
Model 5400 Series is a successor to the Model 3440, with enhanced basic
capabilities. The appearance is similar to the conventional MFC. The
sensor drive system is improved : the zero-drift is further reduced and
the response in the lower range is improved . The Model 5410 Series is a
mass flow meter with the same body design as that of the 5400 series.

Features :

• Control and response in each setting range are improved.
• The following capability to the set voltage is improved (supporting ramping specifications).
• As the valve is improved, the control resolution in each range is improved.

Standard Spesifications :

1. Flow range (N2 equivalent,20℃/1 atm)

5400 : 10 SCCM–20 SLM (freely selectable)

5410 : 10 SCCM–20SLM(freely selectable)

2. Sensor

5400 : Thermal mass flow sensor

3. Valve type

5400 : Proportional solenoid valve (closed when not energized) 5410 : –

4. Control range

5400 : 2–100% (F.S.) 5410 : –

5. Response

5400 : 1 sec. or less (0–100% within ±2% typical) 5410 : –

6. Accuracy

5400 : ±1% F.S. (20℃)

7. Repeatability : Within ±0.2% F.S. (20℃)

8. Operating differential pressure

5400 : F.S. ≤ 5 SLM: 50–300 kPa 5410 : –

F.S.> 5 SLM: 100–300 kPa –

9. Allowable operating pressure

5400 : 300 kPa (G) or less

10. Proof pressure : 980 kPa (G)

11. Leak rate : 1 × 10-11 Pa•m3/s or less

12. Allowable ambient temperature : 0–50℃ (Accuracy guaranteed at 15–35℃, ±0.1% F.S./℃)

13. Allowable ambient humidity : 10–90% (No condensation allowed)

14. Materials of parts in contact with gases :

– Body: SUS316L

– Diaphragm: Ni-Co

– Valve seat: PTFE

– Sealing: SUS316L, Ni

15. Electric connection :

Dsub 9-pin connector as per KFC Standard (Compliant with SEMI Standard)

16. Flow rate input signals :

5400 : 0–5 VDC (Input impedance: 1 MΩ or more)　 5410 : –

17. Flow rate output signals : 0–5 VDC (Minimum load resistance: 250 kΩ or more)

18. Required power supply :

5400 : +15 VDC (±5%) 100 mA, 5410 : +15 VDC (±5%) 100 mA,

−15VDC (±5%) 200mA −15VDC (±5%) 100mA

19. Joint (Main unit bore) : Standard: 1/4 VCR equivalent Option: 1/4 SWL

20. Weight

5400 : Approx. 1000 g 5410 : Approx. 800 g

Kofloc Mass Flow Controller/Mass Flow Meter With Indicator MODEL D8500 SERIES

Diposkan pada Oktober 18, 2016Juni 13, 2017 oleh Yugo Nugroho Boyolali

Mass Flow Controller/Mass Flow Meter With Indicator
MODEL D8500 SERIES

This mass flow controller/meter driven by a 24 VDC power supply has been developed as successor to the MODEL 8300. The view point change function of the display unit and the pattern setting function are unique to this model, and noise resistance has been improved dramatically. A sister model with a detachable display and setting unit is also available.

Features :

• The high-lift actuator allows this compact model to control a large flow rate.
• Equipped with a display and setting unit, this model can be operated by a 24 VDC power supply
• The RS232C/RS485 communication function and integration function are provided as standard equpment.
• The 14-bit converter permits display and operation in 4-1/2 digits.
• Control of the flow rate of inflammable gas is possible, because the heat generating part of the sensor is not exposed to gas.
• There are no limitations on the mounting position that may be employed
• In addition to SV setting, five other patterns can be set.
• Auto zero and auto close functions are also standars.

Standard Spesifications :

– Flow range (F.S.) (at N2 calibration conditions) : 50 SCCM-5 SLM

– Applicable gases (dry gas) : N2, air, O2, CO2, Ar, H2, He, etc.

– Sensor : Thermal mass flow sensor

– Valve actuator : Normally-closed solenoid valve actuator *7

– Valve type : Poppet valve *7

– Control System : a). Control/measurement range : 2-100% F.S.

b). Response : 0-100% F.S. or more within 2 sec. *1

0-bellow 10% F.S. within 4 sec. *

– Accuaracy : a). Flow accuracy : ±1.0%F.S. *2

b). Repeatability : ±0.75%F.S.

– Pressure : a). Proof pressure : 1000 kPa (G)

b). Allowable operating pressure : 500 kPa (G) or less

c). Operating differential pressure *7 : 50–300 kPa (G) => 100-300 kPa (G)

– Temperature : a). Allowable operating temperature : 5–45℃

b). Temperature characteristics : 0.2% F.S./℃

– Humidity : a). Allowable operating humidity : 10–90% (No condensation allowed)

– Leak : He leak rate : 1 × 10-8 Pa•m3/sec. or less *3

– Flow setting method : a). Digital : (1) Setting & display unit

(2) Communications

(3) Event input selection

b). Analog *7 : (1) 0–5 V (2) 4–20 mA (freely selectable)

– Flow rate output : a). Analog : (1) 0-5 V (2) 4-20 mA (interlocked with the above)

– Display : a). Display format : 7-segment 4-digit LED

b). Total flow :12 digits *4

c). Mounting direction :Changeable

d). Built-in/Separate :Built-in, separate 1 m, separate 3 m, separate 5 m

e). Status display LED : OK (within allowable range), ALM (alarm output interlock) OUT1 (event output 1 interlock), OUT2 (event output 2 interlock) SV (set flow), PV (instantaneous flow), TF (total flow) IF (mode setting)

– Other I/O functions : a). Event input : 3 × contact input

b). Alarm output : 1 × open collector output, Max. 35 V, 50 mA

c). Event output : 2 × open collector output Max. 35 V, 50 mA

d). Communications : RS-485, half-duplex, 9600 bps

– Power supply : a). Rating : 24 VDC, current consumption: 300 mA max.

b). Allowable supply voltage range : 21.6–26.4 VDC (Ripple: 5% or less)

– Mounting position : Not specified

– Applicable standards : RoHS and EN62326-1: 2006

– Materials of parts in contact with gases : SUS316, SUS316L, SUS430, FKM, PTFE, chloroprene rubber (option)

– Joint : 1/4 SWL, RC1/4, 1/4 VCR

– Weight : a). Built-in: Approx. 1000 g

b). Separate (excluding the cable): Approx. 1200 g (*6)

Gas Area Flow Meter Kofloc

Diposkan pada Agustus 30, 2016Juni 13, 2017 oleh Yugo Nugroho Boyolali

An area flow meter has a float in a conical cylinder (tapered tube) with a larger end in the upper section and a smaller end in the lower section. The float moves up and down according to the intensity of the flow, and the position at which the float balances indicates the flow rate. Not only simple flow meters that merely measure the flow rate but also flow meters with a valve for flow control, flow meters with a load pressure fluctuation type flow controller, flow meters with a supply pressure fluctuation type flow controller, and flow meters with an alarm switch are available.

Gas Area Flow Meter Model

Flowmeter with Precision Needle Valve MODEL RK1250 SERIES
Flowmeter with Precision Needle Valve MODEL RK1200 SERIES
Flowmeter with Bellows Needle Valve MODEL RK1500 SERIES
Low cost MODEL RK1700 SERIES
Purge Flowmeter with Needle Valve MODEL RK1650 SERIES
Purge Flowmeter with Needle Valve MODEL RK1600R SERIES
Simplified Flexible Flow Meter MODEL RK1100 SERIES
Flow Meter with Flow Controller MODEL 2503F SERIES
Flow Meter with Flow Controller MODEL 2504FR SERIES
High Precision Flowmeter MODEL RK1450 SERIES
High Pressure Flowmeter(for Sensitive Measurements) MODEL RK1400 SERIES
Purge Flowmeter MODEL RK1050 SERIES
Purge Flowmeter MODEL RK1000 SERIES
Low-Cost Flow Meter for Air and Nitrogen MODEL RK1150 SERIES
Reed Switch Flowmeters(for Alarm Switches) MODELS RK1970/RK1975/RK1976 SERIES
Flowmeters with Photosensor(for Alarm Switches) MODEL RK1812/RK1814 SERIES
Large Capacity Flowmeters MODELS RK2000/RK2005/RK2006 SERIES
Precision Flow Meter for Laboratory(with Stand for Precision Flow Measurement) MODEL RK1360 SERIES
Multiple Flow Meter with Needle Valve MODEL RK120X SERIES
Multiple Flow Meter MODEL RK140X SERIES
Flow Meter for Gas Mixing MODEL RK120XM SERIES
Acrylic Resin Flow Meter MODEL RK200 SERIES
Acrylic Resin Flow Meter MODEL RK500 SERIES
Large Capacity Flow Meter MODEL RK1950AP SERIES
Precision Flow Meter for Pressure Regulator MODEL RK4400 SERIES

Liquid Area Flow Meter Model

Flowmeter with Precision Needle Valve MODEL RK1200 SERIES
High Precision Flowmeter MODEL RK1450 SERIES
High Pressure Flowmeter(for Sensitive Measurements) MODEL RK1400 SERIES
Compact Reed Switch Flow Meter for Alarm Switches MODEL RK1930,RK1935 SERIES
Reed Switch Flowmeters(for Alarm Switches) MODELS RK1970/RK1975/RK1976 SERIES
Large Capacity Flowmeters MODELS RK2000/RK2005/RK2006 SERIES
Precision Flow Meter for Laboratory(with Stand for Precision Flow Measurement) MODEL RK1360 SERIES
Acrylic Resin Flow Meter MODEL RK400 SERIES
Acrylic Resin Flow Meter MODEL RK500 SERIES
Large Capacity Flow Meter MODEL RK1950AP SERIES

Flow Meters and Controller for Gas Kofloc

Diposkan pada Agustus 30, 2016Juni 13, 2017 oleh Yugo Nugroho Boyolali

Kofloc are Manufacturing and sale of area flow meters, fluid control valves, electronic flow meters, various fluid controllers, nitrogen, oxygen and ozone gas generators, fuel battery evaluation devices, deodorizers, water processors, etc.

Kofloc has four main product :

Gas Flow Instrument
Liquid Flow Instrument
Gas Generator
Engineering Device

Mass flow controllers

In comparison with the conventional mechanical products, the mass flow measurement / control technology used in a mass flow meter and controller extracts electrical signals from the flow without significantly influencing the temperature or pressure, thus permitting sophisticated flow measurement and control. The technology is widely used for manufacturing semiconductors, liquid crystal, optical fibers and other electronic devices, gas supply for fuel cells, and fuel gas control for burners, foods, biotechnology, as well as for experimental facilities and production/inspection systems in many other industries.

Kofloc model Mass Flow Controller: