FLOMIC

Water leaks Detection

Diposkan pada Desember 11, 2011Juni 13, 2017 oleh Yugo Nugroho Boyolali

Ultrasonic flow meters FLOMIC FL5034 and FL5054

Solution for water leaks detection

The battery-powered FLOMIC FL5034 and FL5054ultrasonic flow meters are intended for operational and invoicing measurements of instantaneous flow rate,pressure and consumption in water piping in observance of standard EN 14154 in water works, water distribution systems and other industrial applications.

The features of the FLOMIC flow meters make them suitable for water-leak detection and tracking and monitoring of the general condition of water-supply networks.

Ultrasonic flow meter FL 50X4 design

These flow meters are of a compact design with the IP 68 protection class. They are characterised by high measurement accuracy and long-term stability over a wide range of measured values. The meters do not need any external power supply, do not include any moving parts and, have significantly lower hydraulic losses.

The measurement method utilised by these meters is a single-beam (FL5034) or dual-beam (FL5054) transit-time pulse method based on evaluation of the time needed for an ultrasonic signal to cross the distance between two measuring transductors. In the standard version, the meter measures instantaneous flow rate (in m3/hour) and the total volume of water passed through the meter (in m3) in the given flow direction.

The measured data are converted into passive pulse output signals. The meter output signals can be connected via data transfer systems to remote computer control stations. Flowmeter electronics also includes data storage with various possibility to connect (GSM module, RS232, optical data probe). This feature can be usefull for distance measuring points without electricity.

Flow meters FLOMIC FL 50X4 can effectively save customers costs everywhere, where needs to measure water and is not possible or is expensive to connect to emergy power grid.

Technical parameters
usage	measurement of total volume of the water passed through and instantaneous flow rate and pressure
the principle of the measurement	transit-time
type	– one beam (1B – FL5034) or dual beam (2B – FL5054) – compact version
the range of dimensions	DN32 to DN300
temperature of measured fluid	to 50°C
pressure	up to 4.0 MPa
flow sampling period	1 sec
electrical outputs	pulse and current
interface	optical probe, RS 232, GSM module
data storage	data archive
power source	Li battery 3.6V, 16Ah, lifetime 6 to 8 years
protection class	IP68

Ultrasonic flow meters FLOMIC FL103X

Diposkan pada Desember 11, 2011Juni 13, 2017 oleh Yugo Nugroho Boyolali

Ultrasonic flow meters FLOMIC FL103X

Ultrasonic flow meters of the type series FLOMIC FL103X (FL1034 – the compact version, FL1035 – with remote electronic unit) are intended for measurement and storage of the measured data of instantaneous flow rate, total volume passed through the meter sensor, of cold and hot water and other liquids of similar properties in a wide range of industrial applications. Optionally, the meters can be provided with pressure gauges to monitor the fluid pressure in the piping.

The FLOMIC FL103X meters are noted for high measurement accuracy and long-term stability over a wide range of measured values. They have equipped by internal battery and they can be installed anywhere without availability of external power. The meters include no movable parts and, compared to conventional flow meters, their hydraulic losses are significantly lower.

The associated electronic unit provides for processing of the sensor signals and visualisation of the values of instantaneous flow rate, total fluid volume passed through the meter sensor and fluid pressure, as well as for archiving of the measured data in specified time intervals in the internal meter memory unit. The archived data can be retrieved either via an optical interface, RS 232 communication line or GSM module for further processing by, for example, a notebook computer. On-line processing of the measured values is also possible using the pulse or current (4 to 20mA) outputs.

Technical parameters:
usage	measurement of total volume of the liquid passed through, instantaneous flow rate and pressure
the principle of the measurement	transit-time
type	– one beam (1B) – remote and compact version
rated piping size	DN32 to DN300
maximum permitted pressure	1.6 MPa, 4 MPa (classes MAP 16 and MAP 40)
measurement accuracy	according to EN 14154
flow sampling period	1 sec
tempetarure of liquid	up to 150°C
protection class	IP67 / IP68 in remote version
power source	Li battery 3.6V/16Ah, garanted battery lifetime 6 to 8 years

Ultrasonic water meters FLOMIC FL5024 and FL5044

Diposkan pada Desember 11, 2011Juni 13, 2017 oleh Yugo Nugroho Boyolali

Ultrasonic water meters FLOMIC FL5024 and FL5044

The battery-powered FLOMIC FL5024 and FLOMIC FL5044 ultrasonic water meters are intended for operational and invoicing measurements of instantaneous flow rate, pressure and consumption in water piping in observance of standard EN 14154 in water works, water distribution systems and other industrial applications. These water meters are of a compact design with the IP 68 protection class. They are characterised by high measurement accuracy and long-term stability over a wide range of measured values. The meters do not need any external power supply, do not include any moving parts and, have significantly lower hydraulic losses. The technical parameters and other features of the FLOMIC water meters make them suitable not only for water consumption measurements, but also for water-leak tracking and monitoring of the general condition of water-supply networks, where the meter output signals can be connected via data transfer systems to remote computer control stations. The measurement method utilised by these meters is a single-beam (FL5024) or dual-beam (FL5044) transit-time pulse method based on evaluation of the time needed for an ultrasonic signal to cross the distance between two measuring transductors. In the standard version, the meter measures instantaneous flow rate (in m3/hour) and the total volume of water passed through the meter (in m3) in the given flow direction. The measured data are converted into passive pulse output signals.

OPTIONAL METER ACCESSORIES:

Bi-directional flow rate and volume measurements with visual and electronic indication of the actual flow rate direction
Measurement and display of instantaneous water pressure values within the range of 1 to 16 bar
Using a passive current output signal 4 to 20 mA, monitoring the instantaneous flow rate or flow pressure values
Measured data storage with user-selectable sampling period of 1 minute to 1 year
Actual and stored data reading via the USB or RS 232 interface
Connection to a remote data transfer system by means of a GSM module
Use of alternative measurement units (Gal/min, or litre/sec)
Application of the meter within drinking-water supply systems
Power supply via the 4 to 20 mA current line

Technical parameters
usage	measurement of total volume of the water passed through and instantaneous flow rate and pressure
the principle of the measurement	transit-time
type	– one beam (1B – FL5024) or dual beam (2B – FL5044) – compact version
the range of dimension	DN32 to DN200
temperature of measured fluid	to 50°C
pressure	up to 1.6 MPa
flow sampling period	1 sec
electrical outputs	pulse and current
interface	optical probe, RS 232, GSM module
data storage	data archive
power source	Li battery 3.6V, 16Ah, lifetime 6 to 8 years
protection class	IP68

Battery powered ultrasonic water meters

Diposkan pada Desember 11, 2011Juni 13, 2017 oleh Yugo Nugroho Boyolali

Battery powered ultrasonic water meter FLOMIC FL102X

Easy measurement without power grid

Battery-powered ultrasonic water meters of the type series FLOMIC FL102X (FL1024 – compact version, FL1025 – remote version) are intended for industrial and commercial applications in water supply systems where they provide for measurement of instantaneous flow rate, pressure and consumption of water, as well as storage of the measured data.

The meters utilize the principle of different propagation speeds of ultrasonic signals if directed in and against the direction of water flow. Ultrasonic water meters are noted forhigh accuracy and long-term parameter stability over a wide range of measured flow values. The FLOMIC water meter does not need any external power source, no moving parts and, compared to conventional meters, significantly lower hydraulic losses.

Water meter electronics functions

The electronic accessories of the water meters make possible measurement and display of instantaneous flow rate, pressure and total volume of water passed through the meter since it was reset last time; the flow data measured at pre-set intervals can also be stored and communicated via optical interface to a portable PC where they can be retrieved. The FLOMIC water meter also include pulse and current (4 to 20 mA) outputs.

Technical parameters
usage	measurement of total volume of the water passed through and instantaneous flow rate and pressure
the principle of the measurement	transit-time
type	– one beam (1B) – compact and remote version
the range of dimension	DN32 to DN200
accuracy of measurement	class B according to ISO 4064-1
temperature of measured fluid	to 50°C
pressure	up to 1.6 MPa
flow sampling period	1 sec
electrical outputs	pulse and current
interface	optical probe, RS 232, GSM module
data storage	data archive
power source	Li battery 3.6V, 16Ah, lifetime 6 to 8 years
protection class	IP67 / IP68 in remote version

Ultrasonic Flow Meters

Diposkan pada Desember 11, 2011 oleh Yugo Nugroho Boyolali

Ultrasonic flow meters

Ultrasonic flow meters have been designed for industrial application where they can measure flow rate of a wide range of liquid media, whether electrically conductive or not, including specific corrosive liquids. The scope of application for ultrasonic flow meters covers many functions in practically all industry lines.

In ultrasonic flow meters, the flow rate values are determined from the difference between the travel times of ultrasonic waves propagating in the measured liquid in and against the flow direction.

Ultrasonic flow meters are noted for high accuracy, excellent long-term stability of measurement over a wide range of measured values, low hydraulic losses and simple maintenance. Ultrasonic flow meters are supplied in optional configurations according to the customer requirements, for a wide range of piping sizes. The associated electronic control unit supplies power to the ultrasonic probes, processes the sensor signals and shows the measured values on the meter display. The measured values are also available at optional electric signal outputs.