display | Flowmeter Indonesia

Gastech Air Sampling Pump GSP-300FT-2

Diposkan pada Oktober 18, 2016Juni 13, 2017 oleh Yugo Nugroho Boyolali

GSP series Air Sampling Pump GSP-300FT-2

GASTEC developed a detector tube system utilising an electric suction pump in response to growing user needs for improvements in measuring time and routine in the working environment. Moreover, although the reagent filling density of detector tubes is generally high, making effective sampling with conventional electric suction pumps next to impossible at times, the compact GASTEC GSP-300FT-2 has a powerful suction performance that enables effective sampling with any of the designated detector tubes.

GASTEC’s new detection tube measurement system provides performance meeting the relevant measurement criteria for the respective working environment

Features

•Flow volume of 50-250mL/min can be set for the inserted detector tube

•The fixed flow function automatically regulates load changes

•Real-time flow volume and integrated flow volume are automatically corrected to the values for 20ºC

•Automatic start enables sampling to begin after a preset time

•Automatic stop at preset time/volume, with total flow and transpired time calculations

•Ventilation system configured for uninterrupted sampling

•Compact and lightweight; 10 hrs. continuous operation on 2 AA batteries

•Specially-suited detector tubes for continuous workplace sampling (10 min.)

•Formaldehyde tubes 91P, 91PL can be used

•Activated carbon and other solid-collecting detector tubes can be utilised

Specifications

Integrated flow rate

0-250mL/min

Real-time flow rate Parameters

50mL/min: 0.0-34.5kPa

100mL/min: 0.0-30.0kPa

150mL/min: 0.0-25.0kPa

200mL/min: 0.0-21.0kPa

250mL/min: 0.0-16.5kPa

Selectable modes

Timer mode: Automatic shut-off of air pump at preset time; digital display of integrated flow rate

Fixed parameter mode: Automatic shut-off of air pump at preset volume; digital display of elapsed sampling time

Display

LC Digital Display (backlict)

Real-time Flow Rate	mL/min
Integrated Flow Rate	0.000-9.999L 10.00-99.99L 100.0-999.9L
Elapsed sampling time	0-999min

Configuration / features

Mass flow sensor (with temperature correction) and diaphragm suction pump, dustproof, splashproof construction, automatic start function, and with initial presetting circuit for maintaining a constant volume of flow

Accuracy of real-time/integrated flow volume values

Standard deviation of +/-5% (for a minimum real-time flow of 50mL/min at a fixed temperature)

Operating Temperature / Humidity range

0-40ºC(32- 104 ºF) 10-90%RH (no condensation)

Power source

Alkaline dry battery AA type (x 2) allows 10 hrs. continuous operation with 2 AA batteries

Dimensions

80(W) x 40(D) x 140(H)mm

Weight

300g(including batteries)

Accessories

Two alkaline dry battery AA type (x 2), detector tube adaptors, dustproof filters (x 5), screwdriver, black suction nipples (already attached before shipping), instruction manual, etc

Approval

CE-marking(2004/108/EC)

Gastech Hand-held Combustible gas detector [MA-2510]

Diposkan pada Oktober 18, 2016Juni 13, 2017 oleh Yugo Nugroho Boyolali

Hand-held Combustible gas detector [MA-2510]

Feature

•Compact and Lightweight

•Low power consumption sensor

•Analog display shows LEL or concentration (%)

•Measurement of combustible gases other than methane

Specification

1.Measurement range: 0-25%LEL, 0-100%LEL

2.Measurement method: Catalytic combustion gas sensor

3.Sampling method: Diaphragm pump

4.Display: Analog metre (backlit)

5.Indicating accuracy: +/-5% at full scale at time of calibration

6.Alarm threshold and signal: > 20%LEL

7.Alarm threshold and signal: intermittent sound and blinking light

8.Power source:

– Three size C manganese dry cell batteries for 4 hours of operation (without alarm signal being emitted)

– Three size C alkaline dry cell batteries for 8 hours of operation (without alarm signal being emitted)

9.Dimensions: 151(W) x 71(D) x 115(H)

10Weight: 1.1kg

11.Explosion proofing: Certified by Japan Ministry of Health, Labour and Welfare (Class id3aG3 No.T62339)

Kofloc Low–Cost Mass Flow Meter With Display Model 3810DS II Series

Diposkan pada Oktober 17, 2016Juni 13, 2017 oleh Yugo Nugroho Boyolali

Low–cost Mass Flow Meter With Display

MODEL 3810DS II SERIES

The
Model 3810DS II is a mass flow meter with a built-in display using a
time-tested flow sensor. The 3810DS II displays total flow in addition
to instantaneous flow, which is an improvement on the previous model
3810DS. Just like the 3810DS, the 3810DS II is also available with flow
sensor and precision needle valve built into one piece.

Features

・ Precision needle valve for controlling and monitoring very low flow rates
・Two alarm outputs for flow monitoring
・Analog output for instantaneous flow and pulse output for total flow
・Compact and lightweight
・The display is built in and the meter only requires connection to a 24-VDC power supply.
・The meter measures mass flow and directly reads the flow.
There is no need for flow correction calculations based on tem-perature and pressure.

Standard Specifications

– Sensor : Thermal sensor

– Flow range (N2 equivalents):

* 10-20 SCCM

*SLM 21 – 100 SLM

– Accuracy :

*Within ± 2% of Porto at 25 ℃

*Within ± 3% of Porto at 25 ℃

– Operating pressure: 0.0-0.5 MPa (G)

– Proof pressure: 1.0 MPa (G)

– Allowable ambient temperature: 0-50 ℃

– Temperature: ± 0.2% ‘s Porto/℃ (15 & ndash; 35 ℃)

– Materials of the parts in contact with gases:

* Body: SUS303, PTFE
* Sealing: FKM
* Option: Neoprene

– Connection End: Standard: Rc 1/4 (Ask us for other sizes.)

– Power supply : 24 VDC ± 5%, 100 mA (option: AC adapter)

– Flow output signal : 1 – 5 V, 4-20 mA (Select when ordering.)

– Event output : NPN open collector 2 × Maximum output rating: 30 VDC, 50 mA

^Cable connection

Connector: 3810DS II end: HR10A-7R-6P (Hirose Electric) Cable end: HR10A-7P-6S (Hirose Electric)

^A conversion cable for the previous model 3810DS is available.

!!NOTE!!
Specifications
relating to the flow range (e.g., flow range, accuracy and
repeat-ability) are expressed in N2 or air equivalent. The product will
be built with the primary pressure of 300 kPa or less and the secondary
side open to the atmos-phere. For details on the pressure requirements,
ask us.

Paperless Recorders

Diposkan pada Agustus 28, 2016Juni 13, 2017 oleh Yugo Nugroho Boyolali

The number of direct analog inputs varies by model with the PR10/20/30 offering up to 6, 24 and 48 respectively as well as optionally External channels input via Serial or TCP/IP Modbus; maximum external channels are 24, 48 & 96 channels respectively. Derived Math channels are optional with the PR10/20/30 offering 15, 40 & 60 channels respectively. All analog, external, derived & digital inputs have a 100ms total sample rate. All analog, external and digital input channels are freely configurable and named to suit your process requirements.

The new PR series paperless recorders are launched in full product range with outstanding specifications and features. PR series includes a low-cost PR10, a popular PR20 and a high-end PR30. Compared with the first generation VR series, PR series offers much more, for example recorders in 4.3” & 12.1” displays in addition to 5.6”, 100 msec. sampling rate, external channels, batch, custom display, more strict FDA 21 CFR part 11, handwriting messages, SD slot, 2 USBs, pulse input, field calibration, Web Server, email, 19 languages, IP65, and yet in shorter depth 167mm.

The PR Series display real-time measured data on the touch screen and saves data to internal memory that may be exported to external USB or SD cards as well as over a LAN with the optional PR-Data Acquisition Studio software.

Data logging supports operator freehand messages directly on the touch screen that may be saved with the Data files as well as the data files being started and stopped as a Batch operation with additional batch / lot information (optional). The data files as well as convenient report generation may be printed from the recorder via LAN to network printers or via its USB port directly to printers supporting PCL4 / PCL5 / PCL6 language.

Applications:

Ovens – Furnaces – Kilns
Environmental Chambers
21 CFR21 Part 11 FDA Requirements
AMS2750E Heat Treating Requirements
Boilers
Sterilizers / Autoclaves
Power Generation Variables
Flow Applications / Totalizers
Water / Waste Water Flow
Test & Measurement Applications

With 200MB on-board RAM for data storage and reliable low cost SD or USB cards the PR Series is ideal for monitoring, recording and evaluating processes in a variety of applications and industries. With the optional firmware Plus 1, 2 or 3, the PR Series includes multiple additional functions including math, counters, totalizers, high frequency digital inputs, batch data logging, monitor and record external channels, create custom display views that support animation as well as meeting the requirements of CFR21 part 11.

With LAN connection the PR Series offers emails upon alarm/event conditions, interactive web server, time synchronization and direct printing to network printers.

Features

Touch Screen, TFT, 65K color
100 msec. scan rate
Internal memory: 256 MB Flash
CPU: ARM Cortex-A8, 1Ghz
Standard: Ethernet, SD slot & USB
Option: RS232/422/485 & Pulse input
Protection: IP65 front & IP20 rear
Standards: CE, cULus & RoHS
Pulse input for flow applications
Direct Printer connectivity
Webserver & Email directly from Recorder
Remote IO channels, Virtual channels
Master & Slave, Modbus RTU and TCP protocols
Custom display pages similar to HMI
Batch operations, built in security & FDA 21 CFR part 11
19 international languages

PR series Paperless Recorder

PR10 – low-cost paperless recorder

PR20 – popular paperless recorder

PR30 – high-end paperless recorder

Seametrics Flow Meter Measurement

Diposkan pada Agustus 4, 2013Juni 13, 2017 oleh Yugo Nugroho Boyolali

Seametrics Inc. is a designer and manufacturer of a wide variety of flow metering products. Since 1990 the company has provided innovative solutions to users in industrial water treatment, energy management, irrigation, utilities, transportation, and chemical handling. Seametrics products have a reputation for durability and accuracy at a competitive price, and are sold largely through a network of domestic and international distributors.

Seametrics flow measurements is committed to providing a broad range of flow metering products for the Industrial/Municipal and Irrigation industries in addition to a variety of OEM applications. We maintain an attitude of responsiveness to the many flow metering needs encompassed within these industries and are vigilant in our efforts at developing new flow meter products and enhancing our existing products to better serve our customers.

Since 1990, Seametrics flow measurement has been providing high-value flow meters and controls. The guiding principles have been common sense, simplicity, economy and durability. We started with mechanical insertion meters that extended the bottom of the flow range and were easy to repair. Over the years our flow meter product family has expanded to include electronic turbine flow meters, inexpensive and highly accurate mechanical low flow meters, and a variety of flow meter controls and displays. In recent years Seametrics flow meters has become a leading manufacturer of electromagnetic meters (mag meters) in a variety of designs suitable to a wide range of applications. These include insertion, spool, and low-flow chemical-resistant mag meters.installasi

Kind of Flow Meters Product