Mass Flow Meter Coriolis RHM60
- Standard pressure ratings up to 490 bar (7107 psi)
- Temperature ratings from -196 to 350°C (-320 to 662°F)
- Mass flow uncertainty down to 0.15%
- Density uncertainty down to 0.5%
- Repeatability better than 0.05%
- Typical measuring ranges between 60 and 3000 kg/min
- Accurately measure low flow rates down to 45 kg/min
- Unique robust torsion driven oscillation system
- Process connection customization available
- Approved for use in hazardous areas
- Stainless steel case
- Remote and compact transmitter versions available
- Plant Balance
- Terminal Transfer
- Asphalt/Bitumen and Other High Temperature Fluids
- Viscous Fluids
- Reactor Charging
- Batching
- Barge, Ship, Rail Car and Truck Filling
- Torsion oscillator design assures a stable and drift free measurement with excellent signal to noise ratios
- Resilient to external noise and vibration
- Insensitive to pipe pressure changes
- Robust tube wall thickness provides increased operational safety in abrasive Applications
- Corrosion resistant
- Long sensor life guaranteed due to low mechanical stresses in the meter mechanism
- No moving parts to wear or fail
Coriolis Mass Flow Transmitter RHE07/08
The RHE07 transmitter can be used with an RHM sensor in a hazardous area (RHE07 in safe area).CSA certified versions of the RHE07 must be mounted in a safe area.
Features
- Wall mount or rack mount versions
- Built in safety barriers allow operation with RHM sensor in hazardous area
- Selectable metric and English units for Mass, Volume, Density and Temperature
- Configurable pulse/frequency output
- Dual Analog outputs (0/4 – 20/22 mA) individually configurable for Mass, Volume, Density or temperature
- Configurable digital outputs for status and alarm
- Configurable digital inputs for batch control, zeroing and totalizer operations
- Connectivity to control systems with optional digital data interfaces: RS422, RS485, RS232 or HART over analog
- Simple user interface – LCD display and three push buttons with intuitive menu design
- Password protected setup
- Single stage and two stage batch control functions
- Brix measurement
- % solids and concentration measurement
- Live density measurement on meters 1″/DN25 and above
- Unique FIXDENS function allows density calculation with small size meters
- Standard gas volume function
- Power consumption less than 15 W
- RHE07c double pulse output version available for dispenser applications
Applications
- General and critical process flows
- Filling, batching and dispensing
- Feed stocks and transfers
Benefits
- Different packages with the same operation and menu structure – only one instrument to learn and operate
- Common spare parts
- Works with all sizes of Rheonik RHM flow sensors
- Remote electronics provides installation flexibility
RHE07/08 Dimention
RHE07/08 General Specifications
Turbine Water Flow Meter TX Series
Ruby bearings and a non-drag pickoff give these adjustable insertion turbine flow sensors a wide flow range and long life. A sensor detects the passage of miniature magnets in the rotor blades. The resulting square-wave signal can be sent for hundreds of feet without a transmitter, over unshielded cable. This signal can be connected directly to many PLC’s and other controls without any additional electronics.
A modular system of electronics can be installed directly on the flow sensor or mounted remotely. The FT430 (externally powered with pulse), FT440 (loop powered), and FT450 (battery powered) all provide digital rate and total displays, as well as a programmable pulse; the FT440 also provides a 4-20 mA analog output. The AO55 is a blind analog (4-20 mA) transmitter. Programmable pulse for pump pacing is available with the PD10.
FEATURES
- Wide flow range
- One moving part
- Hot tap available
- Modular electronics compatible
- Easily depth adjustable for 3-40” pipe
APPLICATIONS
- Clean water
- Large pipes
- Aquariums, water parks
- Water & waste water monitoring
The “hot-tap” models (TX15x/25x) can be installed or serviced without shutting down the line by means of a 2” full-port isolation valve that comes with a nipple for installation on the pipe fitting. In most circumstances, no special tool is required.
Level Transmitter HD1200
Advanced level sensing algorithm suppresses the noise level and artifacts and enabled stable measurement.
One main unit handles two sensors at once. Two different types of sensors can be installed and each may measures different range.
Data logging function to micro SD TM.
Flow measurement by measuring catchment level is possible.
Usage
- Level control of liquid, powder or grains in a tank
- Level measurement of pond, lake or river
- Open channel flow measurement (catchment level)
Model HD1200 Channel 2 Frequency 10 to 60 kHz (select by sensor) Measurement object liquid / powder / grains Resolution internal 1 mm display 1 mm Accuracy ±0.25% F.S. Data refresh rate 2 sec. approx. (depends on sensor) Power source Voltage 100 to 240 V AC ±10 % Power 10 VA Display LCD (back-lit) Output Alarm 4 points / channel
250V AC, 5 A (relay contact)4-20mA current resolution: 1/4000
(Max. load 600Ω)Interface RS-485 (max. distance: 1200 m or less)
RS-232C (max. distance: 10 m or less)Memory microSDTM Operation temperature -20 to 70 deg C Material ABS Protection IP66 level Dimension (WxDxH mm) 176x84x237 Weight 1.8 kg *microSDTM is a trademark of SD Card Association
Model Sensor TS40-5 TS40T-5* TS21-5 TS12-5 Frequency 40 kHz 21 kHz 12 kHz Measurement range
(1/2 value for powder)0.3 – 20 m 0.3 – 15 m 0.6 – 40 1.2 – 60 m Directive angle
(half of full angle)12° 22° 14° Operation temperature -20 to 70 deg C -20 to 60 deg C Material Epoxy, PP PVDF sensor surface: Epoxy
case: PVCProtection IP68 level IP66 level IP53 level Dimension (mm) dia 84×90 dia 98×87 dia 145x120 dia 264x181 Cord length 5 m Weight 500 g 860 g 290 g 1 kg Screw R1 (PT1) G1 (PF1) G1 (PF1)
Ultrasonic Level Sensor Honda HD350
- Compact and light weight level meter which include sensor and display in one unit.
- Digital signal processor realized accurate measurement Graphical display
- Mask function equipped. : Unnecessary signal can be eliminated from the received signal by manually. Echo signal from existing structure positioned between sensor and target cause interference. Mask function removes these unnecessary echo effectively.
- Wide measurement range
- HD350-A:0.3 – 10 m
- HD350-B:0.15 – 4 m
- RS-485 (MODBUS protocol)
- 4 – 20 mA current output
- Contact points (relay output)
- Level control of liquid, powder or grain in a tank
- Level measurement of lakes, ponds or rivers