25 SERIES

Construction

• Aluminum or cast iron construction
  • Aluminum – for excellent power to weight ratio
  • Cast iron – for extra durability
• Journal bearings for long life and good over-hung load capacity
• Buna-N seals are standard for petrolium and glycol based fluids – “Viton^®” seals are optional
• Preasuse balanced plates for greater efficiency
• Aavailable in a single or bi-rotational configuration
  • [C] – Clockwise 
  • [A] – Counter-Clockwise)

Available Configurations

• 25
• TP25
• NTP25
• PB25

25 & TP25 Products

• Maximum speed to 2500 rpm
• Fluid displacements up to 19.2 cir (301.9 ccr)
• Maximum preasure up to 2500 psi (172 bar) – TP25
• Maximum preasure up to 3000 psi (206 bar) – 25
• Combined flow range up to 208 gpm (787 lpm)
• Contact us for cast iron availablity

NTP25 & PB25 Products

• Maximum speed to 2500 rpm
• Fluid displacements up to 15.50 cir (254.4 ccr) 
• Preasures  up to 3000 psi (206 bar) – NTP25
• Combined flow range to 167 gpm (632 lpm)

Product Category Selection

• 
  

  25 ASSEMBLED UNITS

flow meter, water meter, ultrasonic, electromagnetic, variable area, vortex, steam, air, water, udara, limbah, solar, oil, level sensor, air motor, hydraulic, pneumatic, pressure switch, flow sensor, connector, plug, receptacle, flow transmitter, portable, clamp on, wall mount, hand held, high pressure, gauge, battery, sensor, reflex, seal, cylinder, solenoid, regulator, valve, shaft, piston, clutch, brake

20 Series

Construction Aluminum construction for excellent power to weight ratio Journal bearings for long life and good over-hung load capacity Buna-N seal are standard for petroleum & glycol based fluids – “Viton®” seals are optional Pressure balanced plates for greater efficeincy Maximum speed to 2500 rpm Fluid displacements up to 9.10 cir (149.1 ccr) each Section Maximum pressure to 2500 psi (172 bar) Combined flow range up to 197 gpm (745.6 lpm) per section Available in a single or bi-rotational configuration [C] – Clockwise  [A] – Counter-Clockwise) Available Configurations (Tandem units with:) NST20 – flow sensitive unloading valve NSD20 – flow sensitive unloading valve & power beyond port for the unloading valve NSH20 – pressure sensitive unloading valve NDS20 – pressure summation unloading valve NSHD20 – flow and pressure sensitive unloading valve PSH20 – air operated unloading valve

   Product Category Selection

• 
  

  20 ASSEMBLED UNITS

flow meter, water meter, ultrasonic, electromagnetic, variable area, vortex, steam, air, water, udara, limbah, solar, oil, level sensor, air motor, hydraulic, pneumatic, pressure switch, flow sensor, connector, plug, receptacle, flow transmitter, portable, clamp on, wall mount, hand held, high pressure, gauge, battery, sensor, reflex, seal, cylinder, solenoid, regulator, valve, shaft, piston, clutch, brake

P16 SERIES

Construction Cast iron pumping sections for durability P16 SERIES Construction Cast iron pumping sections for durability Aluminum body and flange for excellent power to weight ratio Journal bearings for long life and good over-hung load capacity Buna-N seals are standard for petrolium & glycol based fluids – “Viton®” seals are optional Preasuse balanced plates for greater efficiency Available Configurations P16 – Standard TP16 – Tandem, 2 and 3 Place PVP16 – Priority Vavle CP16 – Clutch Pump, “V” Belt and Serpintine TP-PVP – Combination P16 with Priority Vavle PB16-P12 – Piggy Back HP16 – High Preasure THP16 – Tandem High Preasure FPR16 – Cast Iron, Bi-directional P16, TP16, PVP16, CP16, TP16-PVP16 Models Fluid displacements to 3.9 cir (63.9 ccr)  Preasures to 3000 psi (206 bar) Flow range to 38 gpm (143.8 lpm) per section,  the TP16 is 32 gpm (121 lpm) Prioity Flow range 2 to 10 gpm (7.5-37.8 lpm) standard (PVP16 only) PB16-P12 Model Flow ranges Front pump to 42 gpm (158.9 lpm) Rear pump to 42 gpm (158.9 lpm) Displacements Rear pump to 0.90 cir (14.3 ccr)  Preasures Front pump to 3000 psi (206 bar) Rear pump to 2500 psi (172 bar) HP16 & THP16 Models Displacements to 4.8 cir (79.8 ccr)  Preasures to 3100 psi (213 bar) Flow range to 46 gpm (174 lpm) per section THP16 – 42 (158.9 lpm) per section FPR16 Model Displacements to 3.902 cir (63.9 ccr) Preasures to 3000 psi (206 bar) Flow range to 42 gpm (159 lpm) per section All cast iron construction

Product Category Selection

• 
  

  P16 ASSEMBLED UNITS

flow meter, water meter, ultrasonic, electromagnetic, variable area, vortex, steam, air, water, udara, limbah, solar, oil, level sensor, air motor, hydraulic, pneumatic, pressure switch, flow sensor, connector, plug, receptacle, flow transmitter, portable, clamp on, wall mount, hand held, high pressure, gauge, battery, sensor, reflex, seal, cylinder, solenoid, regulator, valve, shaft, piston, clutch, brake

PGP/PGM 500 SERIES

PGP/PGM 500 series gear pumps/motors are an advanced performance version of the international “bushing block” style pumps. PGP/PGM 500 series pumps/motors offer superior performance, high efficiency and low noise operation at high operating pressures. They are produced in three frame sizes (PGP/PGM 505, PGP/PGM 511, PGP/PGM 517) with displacements ranging from .12 to 3.17 cir (2 to 52 ccr).  A wide variety of standard options are available to meet specific application requirements worldwide.

High efficiency

Pressure balanced bearing blocks assure maximum efficiency under all operating conditions.

Application flexibility

International mounts and connections, integrated valve capabilities and common inlet multiple pump configurations provide unmatched design and application versatility.

AdvantagesUp to 4000 psi (275 bar) continuous operation High strength materials and large journal diameters provide low bearing loads for high pressure operation.

Low noise

The 500 Series has optimized flow metering to provide reduced pressure pulsation and exceptionally quiet operation.

Product Category Selection

• 
  

  505 ASSEMBLED UNITS

• 
  

  511 ASSEMBLED UNITS

flow meter, water meter, ultrasonic, electromagnetic, variable area, vortex, steam, air, water, udara, limbah, solar, oil, level sensor, air motor, hydraulic, pneumatic, pressure switch, flow sensor, connector, plug, receptacle, flow transmitter, portable, clamp on, wall mount, hand held, high pressure, gauge, battery, sensor, reflex, seal, cylinder, solenoid, regulator, valve, shaft, piston, clutch, brake

HP SERIES

HP SERIES

Construction

• Aluminum body and flange for excellent power to weight ratio
• Journal bearings for long life and good over-hung load capacity
• Buna-N seals are standard for petrolium & glycol based fluids – “Viton^®” seals are optional
• Preasuse balanced plates for greater efficiency
• Exceptionally compact and lightweight for their capacity

Available Configurations

• HP7 – Standard
• THP7 – Tandem, 2 Place
• PBHP7 – Piggyback (available upon request)
  • contact Product Support for assistance
• HP8 – Standard
• THP8 – Tandem, 2 Place
• PBHP8 – Piggyback (available upon request)
  • contact Product Support for assistance

HP7 Products

• Single, Multiple and Piggyback pump configurations are available
  • contact Product Support for piggyback configurations
• Fluid displacements up to 10.74 cir (175.9 ccr)
• Preasures to 4000 psi (275 bar) 
• Flow range to 116 gpm (40.6 lpm) per section

oducts

• Single, Multiple and Piggyback pump configurations are available
  • contact Product Support for piggyback configurations
• Flow range to 177 gpm (670 lpm) per section
• Displacements to 16.38 cir (268.4 ccr)
• Preasures to 4000 psi (275 bar)

Product Category Selection

• 
  

  HP7 ASSEMBLED UNITS

• 
  

  HP8 ASSEMBLED UNITS

flow meter, water meter, ultrasonic, electromagnetic, variable area, vortex, steam, air, water, udara, limbah, solar, oil, level sensor, air motor, hydraulic, pneumatic, pressure switch, flow sensor, connector, plug, receptacle, flow transmitter, portable, clamp on, wall mount, hand held, high pressure, gauge, battery, sensor, reflex, seal, cylinder, solenoid, regulator, valve, shaft, piston, clutch, brake

GEAROTOR SERIES

Specifications for Gerotor Pumps & Motors

• Gerotor design, High Speed/Low Torque [HSLT]
• Aluminum construction for optimum power to weight ratio
• Bi-directional
• High-pressure mechanical seals available for series application to 1000 PSI back pressure
• Roller bearings for long life
• Buna-N Seals are standard for petroleum and glycol based fluids
• MGG — Motor with shaft speeds to 5000 rpm
• PGG — Pump with shaft speeds to 3500 RPM
• Up to 17 HP output for motors

Product Category Selection

• 
  

  MGG ASSEMBLED UNITS

• 
  

  PGG ASSEMBLED UNITS

flow meter, water meter, ultrasonic, electromagnetic, variable area, vortex, steam, air, water, udara, limbah, solar, oil, level sensor, air motor, hydraulic, pneumatic, pressure switch, flow sensor, connector, plug, receptacle, flow transmitter, portable, clamp on, wall mount, hand held, high pressure, gauge, battery, sensor, reflex, seal, cylinder, solenoid, regulator, valve, shaft, piston, clutch, brake

D/H/HD SERIES PUMPS

A Parker pressure-loaded gear pump consists of two, intermeshing, hardened-steel, precision-ground gear assemblies. These precision gears are enclosed by a high-strength, die-cast aluminum front cover,  back cover and a high-yield, strength-extruded aluminum center section.

Features

• Speeds up to 4000 rpm
• Pressure-loaded design
• Efficient, simple design – few moving parts
• Exceptionally compact and lightweight for their capacity
• Efficient at high pressure operation
• Resistant to cavitation effects
• High tolerance to system contamination
• Reliable under cold weather operation
• Sleeve-bearing construction
• Multi-fluid compatibility Pressure capabilities
• Continuous pressures up to 2500 psi (172 bar)

Controls

• Optional built-in relief valve on ”D” series
• Optional built-in relief valve on ”H” series
• Optional built-in relief valve, and flow divider on ”H” series
• Special controls (Consult Technical Services)

Product Category Selection

• 
  

  D ASSEMBLED UNITS

• 
  

  H ASSEMBLED UNITS

• 
  

  HD ASSEMBLED UNITS

flow meter, water meter, ultrasonic, electromagnetic, variable area, vortex, steam, air, water, udara, limbah, solar, oil, level sensor, air motor, hydraulic, pneumatic, pressure switch, flow sensor, connector, plug, receptacle, flow transmitter, portable, clamp on, wall mount, hand held, high pressure, gauge, battery, sensor, reflex, seal, cylinder, solenoid, regulator, valve, shaft, piston, clutch, brake

Jenis dan Model Parker Pump

ALUMINUM PUMPS AND MOTORS

• 
  

  D/H/HD SERIES PUMPS

• 
  

  GEROTOR SERIES

• 
  

  HP SERIES

• 
  

  PGP/PGM 500 SERIES

• 
  

  P16 SERIES

• 
  

  20 SERIES

• 
  

  25 SERIES

CAST IRON PUMPS AND MOTORS

• 

  DUMP PUMPS

• 

  PGP/PGM 020 SERIES

• 

  PGP/PGM 030/050/075 SERIES

• 
  

  PGP/PGM 300 SERIES

• 
  

  PGP/PGM 600 SERIES

flow meter, water meter, ultrasonic, electromagnetic, variable area, vortex, steam, air, water, udara, limbah, solar, oil, level sensor, air motor, hydraulic, pneumatic, pressure switch, flow sensor, connector, plug, receptacle, flow transmitter, portable, clamp on, wall mount, hand held, high pressure, gauge, battery, sensor, reflex, seal, cylinder, solenoid, regulator, valve, shaft, piston, clutch, brake