Paddle Level Switch

Paddle Level Switch
Paddle Level Sensor
Powder Level Sensor
Grain Level Switch

Introduction

The paddle of the sensor rotates 1 time per minute. As the content in the tank fills up and influences the rotation of the paddle to stop, the relay in the sensor activates.

Feature

■ Easy to install, and used in low or high temperature.
■ Used for fodder, grain, powder, etc.
■ Robust structure and able to adjust the length of axis.

Applications

• Plastic surgery equipment
• Plastic mixer
• Paint solid mixer
• Tube conveyor equipment
• Pulverizer
• Various types of molding equipments
• Rice cleaner

• Grain mixer
• Dryer
• Mill

Specifications

A/S Check Point

If you find any abnormal symptom during operation, please try to check below points.
■ Is the sequence circuit set correctly?
■ Isn’t the lead line cut or short-circuit?
■ Is the float installed correctly regarding the direction or point?
■ Is there output through the lead line when you move the float up and down?

flow meter, water meter, ultrasonic, electromagnetic, variable area, vortex, steam, air, water, udara, limbah, solar, oil, level sensor, air motor, hydraulic, pneumatic, pressure switch, flow sensor, connector, plug, receptacle, flow transmitter, portable, clamp on, wall mount, hand held, high pressure, gauge, battery, sensor, reflex, seal, cylinder, solenoid, regulator, valve, shaft, piston, clutch, brake

Pressure Level Transmitter

Level Transmitter
Pressure Level

Introduction

As the level of the liquid rises, the pressure in bottom part increases. Accordng to the difference of pressure, it is delivered to the gate of the sensor. And the pressure in the air pushes pressure cell. The electric signal generated by the pressure cell is converted to linear current value.

Feature

• Easy install and widely applicable.
• Able to use in clean water, waste water, ocean water, sewage tank, plant, LPG, or chemical tank.

Specifications

A/S Check Point
If you find any abnormal symptom during operation, please try to check below points.
■ Is the sequence circuit set correctly?
■ Isn’t the lead line cut or short-circuit?
■ Is the float installed correctly regarding the direction or point?
■ Is there output through the lead line when you move the float up and down?
If the trouble still exists, please kindly contact below.

flow meter, water meter, ultrasonic, electromagnetic, variable area, vortex, steam, air, water, udara, limbah, solar, oil, level sensor, air motor, hydraulic, pneumatic, pressure switch, flow sensor, connector, plug, receptacle, flow transmitter, portable, clamp on, wall mount, hand held, high pressure, gauge, battery, sensor, reflex, seal, cylinder, solenoid, regulator, valve, shaft, piston, clutch, brake