Positive Displacement Flow Meters

PD Flow Meters
Positive Displacement Flow Meters

FLSTRONIC FOG Positive Displacement Flow Meters are kind of oval gear flow meters whihch are highly competitive meters in which industries are suitable for viscous fluid, as Gasoline, Kerosene, Light Oil, Heavy Oil, Chemical fluid. (Highest viscosity: 1000 CP)


PRODUCT FEATURES
  • High Temperature
  • Compact & light weight
  • Easy to read LCD digital display
  • Excellent LCD Back-light, Self test with lamp
  • Specific Gravity Compensation
  • Display: Flow Rate (LPM, GPM, ㎥/h)
    2 Totalizer (1 Resettable Total, Lock Totalizers)
  • A wide totalizer range: 99,999,999 x 1000 (Liter or Gallons)
  • Wide K-factor range: 0.0001 to 99.9999
  • Pulse Output(0.01 to 1000 liter/ 1 pulse)
  • Resettable totalizer: 999,999 (Liter or Gallon)
  • Battery Life: 5 years
  • NPN or PNP pulse output, Batch Control
GENERAL SPEICIFICATION
Accuracy ± 0.5%
Meter Size 1/8” to 1-1/2” (3~40 mm)
Material FC20, SUS 304,316, Aluminum
Temperature 100℃, 180℃
Pressure 10 Mpa, 20 Mpa
Output NPN, PNP Open Collector
Current output 4-20mA (2 or 3 wire)
RS485 Interface
Power Supply Lithium Battery, DC 24V, AC 230V
Connection Thread – NPT, ISO, BSP Flange – DIN, ANSI, JIS, KS

Gas Flow Meter

Gas Flow Meters
Gas Turbine Flow Meters
Turbine flow meters

Digital Turbine Flometers

FLSTRONIC FTG Gas turbine Flow Meters has high precision and reliabelity with both high and low pressure, varios signal output and low sensitivity of fluid turbulence. Application is gas measurements such as gas, coal gas, LPG, LNG, light hydrocarbon gas and etc
PRODUCT FEATURES
  • High accuracy, excellent repeatability.
  • Wide measurement of gas
  • Easy install & Energy saving.
  • Oil and gas recovery system
  • Built ini pressure and temperature sensor
  • Low starting flow, low flow velocity
  • Flow Rate Display(LPM, GPM, ㎥/h)
  • Battery life: 4-5 years
GENERAL SPEICIFICATION
Diameter(mm) Thread : 25 ,40
Flange  : 25,40,50, 65,80,100,125,150,200,300
Accuracy ± 1.5% ± 1%, ± 0.7%(Option)
Material Stainless Steel, Aluminum Alloy
Temperature -30℃ to +80℃
Pressure 10 bar
Output pulse, 2 wire4-20mA DC current signal
Power Supply 12VDC, 24VDC, Lithium battery
Protection IP 65
Explosion Thread, Flange(JIS 10K, 20,
PN 16 bar, ANSI#150, ANSI#300)

FLOAT LEVEL SWITCH

Float Level Switch
Quick Type Level Sensor
Daehan Sensor

PRINCIPLE
It makes output of on/off signal as the quick float moves up and down in which micro switch or reed switch installed. The on/off signal from the sensor controls supply/drain motor and/or high/low alarm. It is able to make up to 3 motors working together.

Applications

  • It is widely used for water tanks and tanks with high corrosiveness
  • It is widely used for tanks for drainage.

  • It is widely used for wastewater tanks

  • It is used in diverse water tanks

FEATURE

  • For controlling motors and alarming to control.
  • Easy to install and is generally used.
  • Widely used to waste water tank & sewage disposal tank.
  • Suitable for high viscosity liquid.
  • Strong against corrosion.
SPECIFICATION

Mountight
 2″PT or JIS 10K 100A / 80AFF
Connection
STD PF 1/2″
Oper. Temp
None
Oper. Pressure
 A.T.M
Material
Flange : Screw 2″
Cable : Soft PVC
Float : ABS
Weight : SS + PV

OPERATING PRINCIPLE

  • By installing the micro S/W inside the quick float, it is possible to operate it to the wanted location, operate the pump, or have the alarm sound by having the float to emerge due to buoyancy to become on (point A) or off (point B).
  • It is equipped with a function to step control (have connection control) 3 motors.
Dimension
Technical Data
Operating Sequence
Unit Selection Chart

Float Level Controller
Power Unit
Wiring
Unit Controller Technical Data

Blogger Developers Network

Gas Analyzer

NGK Gas Analyzer


Since its establishment, NGK has been engaged in manufacturing ceramic insulators and is now recognized as a leading manufacturer throughout the world. Over the past years, NGK developed O2 analyzers using technology based on ZIRCONIA. Most recently, NGK has produced various instruments independently or together with other manufacturers by adapting unique technology based on ZIRCONIA and INFRA-RED rays. NGK now offers a complete range of measuring instruments in addition to consultation on instrumentation and various system components.


Selection Table by Industries

Industry
Facility and Application
Models by Measuring Principle
Zirconia
Infra-red
Foodstuffs
Monitoring atmosphere in foodstuff storage
SH-IID
Paper and Pulp
Measuring water content of chips and paper
Measuring O2 content in soda recovery boiler
TF-III
TF-10
Textiles
Measuring O2 content in industrial boilers
TF-10
PA-210-A
Petroleum and Petrochemicals
Measuring O2 content in industrial boilers
TF-10
PA-210-A
Gases
Measuring O2 in units generating N2
SH-IID
SH-301
Ceramics and Fine 
Ceramics
Atmosphere measuring of kilns
SH-IID
PA-210-B
Iron and Steel
Measuring water content of raw materials for sintering and coal for coke charging
Measuring dust in sintering, blast, and revolving furnaces
ISS-101
Measuring gas components in continuous annealing plants
TF-III
IAG-500
Measuring N2, O2, Ar, etc. in oxygen plants and others
SH-IID
Measuring O2 in exhaust gases of hot blast stoves, heating and soaking furnaces
TF-III
PA-210
Measuring O2 in exhaust gases of industrial boilers
TF-III
TF-10
Metallic Products and Machine Parts
Atmospheric control of oil carbonizing and thermal refining ovens
CP
Primer Movers and Shipbuilding
Industrial boiler, inert gas system
TF-10
TF-SR
Industrial Machinery
Industrial boilers, Measuring NOX in desulfurizing units
TFN-10D101
TFN-20D201
Semi Conductors and Electronic Parts
Measuring O2 for various types of furnace
SH-IID
Measuring O2 in reflow furnaces
SH-201
TFN-30D201
Measuring O2 in diffusion furnaces
SH-301
TFN-21D201
Automotive
Atmospheric control oil carbonizing and thermal refining ovens
CP
Power Station
Measuring O2 at outlet of boiler economizer
MLP-10
TF-11
Measuring O2 in boiler window box
TF-12
Measuring dust at outlet of electric precipitator boiler (EP)
ISS-101
Measuring NOX in desulfurizing units
TFN-20D201
Incinerators
Measuring O2
TF-10
TF-IV
Measuring NOX and SO2 at inlet of smokestack
IAG-500
Measuring dust at inlet of smokestack
ISS-101

Flange Connection Turbine Flow Meters

F2 SERIES FLANGE CONNECTION
DIGITAL TURBINE FLOW METER

The F2 Stainless Steel turbine flow meters with a variety of Flanges when you need a meter that installs in-line quickly. Choose Flange ANSI#150,300, JIS 10K, 20K, 40K, DIN PN 16bar, 40bar.

PRODUCT FEATURES

  • Measurement for Chemical Industries.
  • High accuracy & repeatability
  • Easy to read LCD Back-light.
  • Specific Gravity Compensation
  • Display: 2 Total (1 Resettable, 1 Cumulative Flow Rate), Factory Calibration in gallons and liter. 2 User Calibrations.
  • Compact & Light weight
  • Battery life: 4-5 years

Sanitary Turbine Flow Meters

F2 SERIES SANITARY CLAMP
DIGITAL TURBINE FLOW METER
The F2 Stainless Steel meters with sanitary clamp type can be used with food and beverage industries in preprocess applications.
PRODUCT FEATURES

  • Stainless Steel with Sanitary Clamp type
  • High accuracy & repeatability
  • Easy to read LCD Back-light.
  • Specific Gravity Compensation
  • Display: 2 Total (1 Resettable, 1 Cumulative Flow Rate), Factory Calibration in gallons and liter. 2 User Calibrations.
  • Compact & Light weight
  • Battery life: 4-5 years

F2 Serie Aluminum Turbine Flow Meter

F2 SERIES ALUMINUM
DIGITAL TURBINE FLOW METER

The FLSTRONIC F2 Aluminum Meters are designed to be used for compact & light weight. Applications are best suitable for petroleum based products. F2A Series are available to ISP or NPT fittings.

PRODUCT FEATURES

  • High pressure, durable and compact  turbine flowmeters.
  • Easy to read LCD Back-light.
  • Specific Gravity Compensation
  • Display: 2 Total (1 Resettable, 1 Cumulative Flow Rate), Factory Calibration in gallons and liter.  2 User Calibrations.
  • Compact & Light weight
  • Battery life: 4-5 years

Stainless Steel Turbine Flow Meter

F2 Series Satainless steel Turbine Flow Meter

The FLSTRONIC Stainless Steel Meters have a variety of material, fitting size and flow range. F2 Series provide high accuracy & repeatability, lower costs, compact design and every saving.

Applications include most of chemicals Ammonium, Plating Solutions and Fuel products.

PRODUCT FEATURES

  • Measurement for Chemical Industries.
  • High accuracy & repeatability
  • Easy to read LCD Back-light.
  • Specific Gravity Compensation
  • Display: 2 Total (1 Resettable, 1 Cumulative Flow Rate), Factory Calibration in gallons and liter. 2 User Calibrations.
  • Compact & Light weight
  • Battery life: 4-5 years

Liquid Turbine Flow Meter

Turbine flow meters

Digital Turbine Flometers
Liquid flow meter

FLSTRONIC FT Turbine Flow Meters have simple structure, light weight, high-accuracy, easy install and measure liquid which has no chemical corrosive reaction with stainless steel.
Applications include liquid no impurities and no corrosion such as water, diesel and methanol.
PRODUCT FEATURES
  • High accuracy, excellent repeatability.
  • Wide measurement of liquid
  • Easy install & Energy saving.
  • Excellent LCD Back-light
  • Specific Gravity Compensation
  • Check functions on lamp display
  • Flow Rate Display(LPM, GPM, ㎥/h)
  • Battery life: 4-5 years
GENERAL SPEICIFICATION
Diameter(mm) Thread – 4,6,10,15,20,25,32,40
Flange – 4,6,10,15,20,25,32,40,50, 65,80,100,125,150,200,300,350,400
Accuracy ± 0.5% ± 0.2%(Option)
Material 304m 316(L) Stainless Steel
Temperature -20℃ to +120℃, 180℃(Option)
Pressure 16 bar, 20 bar, 40 bar(Option)
Output 2 wire, 3 wire, pulse frequency,
4-20mA DC current signal
Power Supply 12VDC, 24VDC, Lithium battery
Protection IP 65
Connection Thread, Flange(JIS 10K, 20,
PN 16 bar, ANSI#150, ANSI#300)

Diameter(mm)
Normal Range
Extend Range
DN 4 
0.04 ~ 0.25
0.04 ~ 0.4
DN 6
0.1 ~ 0.6
0.06 ~ 0.6
DN 10
0.2 ~ 1.2
 0.15 ~ 1.5
DN 15 
0.6 ~ 6
0.4 ~ 8
DN 20
 0.8 ~ 8
0.45 ~ 9
DN 25 
1 ~ 10
0.5 ~ 10
DN 32
1.5 ~ 15
 0.8 ~ 15
DN 40
 2 ~ 20
1 ~ 20
DN 50
 4 ~ 40
2 ~ 40
DN 65 
7 ~ 70
4 ~ 70
DN 80
 10 ~ 100
5 ~ 100
DN 100 
20 ~ 200
10 ~ 200
DN 125
25 ~ 250
13 ~ 250
DN 150
30 ~ 300
  15 ~ 300
DN 200
80 ~ 800
40 ~ 800
DN 300
100 ~ 1200
 80 ~ 1200
DN 350
125 ~ 1500
 120 ~ 1500
DN 400
150 ~ 2000
150 ~ 2000

PRODUCT ORDERING